Is your Arlo camera not recording motion? Well, this is the most common issue faced by Arlo camera users. You might be wondering Why Arlo camera not recording – let us tell you that it is totally common with all users.
You might see your camera not recording when motion detected if there are some issues on your device. So in this post, we will discuss some of the most common causes of Arlo camera not recording motion and steps to fix it.
Causes of Arlo camera not recording motion
Here are some of the reasons why Arlo camera not recording motion;
- Internet connection not stable
- Outdated Arlo camera firmware
- Arlo camera not within your WiFi network’s coverage
- Power supply issues
- Arlo camera positioning is not done properly
- Motion detection feature disabled on the camera
- Low Motion detection sensitivity
- Arlo Camera detecting motion but not alerting
- Corrupted firmware on your camera
Steps to fix Arlo camera not recording motion?
In this section, we will show you how you can fix the Arlo camera not recording when motion detected. Make sure you follow the steps very carefully;
1. Power cycle the Arlo camera and the router
- Reboot your camera and the router.
- Rebooting your devices resolves most of the issues showing up on your Arlo camera or the wireless router.
- The devices can unresponsive when idle for a very long time.
- The reboot process reverts them back to their normal state.
- You can cut off the power supply to both devices.
- At last, connect both devices to the power supply after waiting for a few seconds.
2. Inspect the network connectivity issues
- The Arlo wireless camera should be getting a sufficient signal for proper functionality.
- If it is placed far away from the router, your wireless network may go dead even before contacting the Arlo camera.
- Place your Arlo device well within the range of your WiFi router.
- Check for internet settings if you still come across the camera not recording motion issues.
- Contact your service provider if you still face the same issue.
3. Remove obstructions
- If you are wondering why Arlo camera not recording, make sure there’s nothing that is coming in front of your camera.
- Make sure there are no transparent things in front of your camera as they can reduce the motion detection sensor’s ability to grab movements.
- The transparent things can also cause the Arlo camera not recording when motion detected issue.
4. Camera alignment or positioning
- Make sure the Arlo camera is positioned properly.
- In case your camera is not mounted properly, the camera not recording motion issue will show up.
5. Cross-check the Arlo Camera motion detection settings
- To verify the motion detection settings, you need to login to your Arlo camera.
- After that, select My Devices and then choose Device Utilities.
- Tap Motion Detection Test and then you can set the sensitivity to your liking.
- At last, you need to go through the motion detection test on the Arlo camera to check whether your camera’s sensor is working fine or not.
Final thoughts
This post was all about the Arlo camera not recording motion and steps to resolve the issue on your own. We hope this post helped you learn the causes of the Arlo camera motion detection issues and how to fix them without the help of any technician. If you have any doubts or queries, make sure you contact us for more help.